BK Precision 4003 Instruction Manual

Model 4001A, 4003A Sweep Function Generator INSTRUCTION MANUAL

10 Figure 1 – Front Panel Controls (4001A) Figure 2 - Front Panel Controls (4003A)

11 10. FUNCTION SELECTOR SWITCH A rotary switch for waveform selection. 11. FREQUENCY RANGE SELECTOR SWITCH A rotary switch to s

12 Figure 3 - Rear Panel

13 Section 5 Operating Instructions Before applying power to unit, make sure that input voltage setting is correct and the ventilation holes are

14 4. Display will show the frequency and Hz / kHz LED’s will light depending on the frequency. 5.4 VOLTAGE CONTROLLED FREQUENCY

15 Section 6 Maintenance 6.1 PREVENTIVE MAINTENANCE Please follow the following preventive steps to ensure the proper operation of your instru

16 Because of the specialized skills and test equipment required for instrument repair and calibration, many customers prefer to rely

17 Section 8 SERVICE INFORMATION Warranty Service: Please return the product in the original packaging with proof of purchase to the address below.

18 22820 Savi Ranch Parkway Yorba Linda, CA 92887 www.bkprecision.com © 2014 B&K Precision Corp. Printed in

2 Table of Contents Section 1 SAFETY GUIDELINES ... 3 COMPLIANCE STA

3 Section 1 Safety Guidelines WARNING Normal use of test equipment exposes you to a certain amount of danger from electrical shock because testing m

4 Compliance Statements Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with

5 Section 2 Introduction Models 4001A and 4003A are 4 MHz sweep function generators. Model 4003A has an added feature of a 20 MHz digital counte

6 Section 3 Technical Specifications 3.1 FREQUENCY CHARACTERISTICS Waveforms: Sine, Square, Triangle, Ramp, ± Pulse Range: 0.5 Hz to 4 MHz i

7 3.6 SQUARE WAVE Symmetry: 50 % (positive half) to 50 % (negative half) < 2%, 1 Hz to 100 kHz Rise Time: < 90 ns, (20 Vpp, no

8 3.13 FREQUENCY COUNTER (model 4003A only) Display: 5-digit, auto range Display Unit: Hz/kHz auto range Resolution: 0.01 Hz (max.) Ac

9 Section 4 Controls & Indicators 4.1 FRONT PANEL (Refer to Figure 1 & Figure 2) 1. POWER SWITCH Pushing the switch “ON” will l