Bk-precision 1696-1698 - Manual User Manual

INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model 1696/1697/1698 Modelo 1696 / 1697 / 1698 LABORATORY GRADE SWITCHING MO

10 Upper Voltage Limit Setting This feature limits the upper level setting of output voltage to prevent inadvertent setting of high voltage, which m

11 OPERATING INSTRUCTIONS Showing output terminals in ON/OFF state. Showing keypad & Jog dial are in Locked (de-activated) or Unlock (activat

12 STANDARD OPERATION SYMBOLS V- const Constant Voltage mode showing set voltage. V- set This only appears voltage level is ready for setting

13 6.2 Manual Operation Mode In the Manual Operation Mode, once the voltage and current levels have been set, the unit wi11 keep these settings e

14 and returns to its old settings Note : If during any of the above keypad operations, you fall to input a setting within 10 seconds, the unit will

15 go to the next Preset. Whenever you want to determine Preset Programming you can press the CLEAR key to return to normal operation mode. Selecti

16 9. A subprogram is confirmed to retain the new settings only when procedure 7 is completed. 10. You can always input zero time period as a termi

17 Note: Beware that the life span of the power supply is limited by the life of the relay, which is l 00x 10,000 operation as stated by the relay

18 2. Symbols Running in a Timed Program Cycle Unit is ready for the recheck of all subprogram settings.

19 8. MAINTENANCE 8.1 RECALIBRATION Introduction This in-case recalibration is to reduce the difference between the Set values and the displ

2 TABLE OF CONTENTS 1. IMPORTANT SAFETY INSTRUCTIONS & PRECAUTIONS FOR USE ... 3

20 8.2 TROUBLE SHOOTING 1. Keypad and Dial do not work. Check key lock symbol for lock state, unlock unit by pressing SHIFT then Lock/Unlock k

21 9. PC INTERFACE CONTROL USER MANUAL 9.1 Introduction We integrate the micro-controller technology and our proprietary software with switching

22 Installation of software 1. Run Setup.EXE with installation disk that comes with the unit. 2. Follow the instructions in the setup program. Duri

23 If it shows No Connection, check the following: A. Go back to setup and check to see if the correct COM port has been assigned. B. Check the pow

24 C Min Minimum current level. C Max. Maximum current level. V Min. Minimum power level in watt. W Max. Maximum power level in watt. 3. Log

25 8. XXX Delete Clicking on this icon will delete the current or retrieve log on display at (3). 9. Print Log in xls format. P.22 THE DATA LOG W

26 THE TIME FRAME CONCEPT OF DATA LOG The data logging function starts when the software begins to run. When T Min is set to zero seconds, it mea

27 GENERAL INFORMATION Please refer to (Fig. 3) for the following description. 10. Power Supply Description: You may click on and assign an i

28 16. OUTPUT Left click on icon will switch on or off the output. Internal Timed Program The PC interface remote mode really eliminates the tedi

29 4. Data exceeding the rated voltage and current will not be accepted. 5. Voltage exceeding set UVL (upper output voltage limit) will not be acce

3 1. IMPORTANT SAFETY INSTRUCTIONS 1. Do not use this apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation o

30 3. On your power supplies, press [SHIFT] key, then quickly press [RS-232/485] key and select RS-485. 4. A 3-digit number will be displayed.

31 9.4.2 Configuration of Multi Windows Analysis 1. In the tool bar, click on Supply Connect, then click on Multi in the drop menu. 2. A mult

32 4. Click on AutoScan Connect, the window will show the connected power supply indicated with “Y”. 5. Click on the box along

33 8. Remarks: 1. Multi Alleyway Display one click and it will display the Data Log and output data of all the power

34 You can click on the data log to select the power supply, the data log will highlight in blue and the address bar in the lef

35 6. Log Thumbnails Size Set Up - one click allows user to adjust the window size of the Data Log Window in Multi Alleyway Display. Use the sliders

36 10. Delete Log It will delete log data in PC 11. Export to a file log of xls type Click on this icon to export t

37 Service Information Warranty Service: Please return the product in the original packaging with proof of purchase to the address below. Clearl

38 Limited One-Year Warranty B&K Precision Corp. warrants to the original purchaser that its products and the component parts thereof will

39 22820 Savi Ranch Parkway Yorba Linda, CA 92887 www.bkprecision.com © 2006 B&K Precision Corp. Printed in

4 2. Technical Specifications of models 1696, 1697, 1698 Specifications 1696 1697 1698 Output Voltage 1-20VDC 10-5A -40VDC 1-60VDC Output Current

5 Weight 6.6lbs. (3Kg) Accessory PC Windows TM software, RS-232 cable and Operation manual 3. INTRODUCTION This series of laboratory grade, switchi

6 4. CONTROLS AND INDICATORS 1. JOG DIAL 2. UP & DOWN KEY 3. DUAL FUNCTION CONTROL KEYS 4. BLACK COLOR NEGATIVE POLAR

7 4. CONTROLS AND INDICATORS 7. POWER SWITCH 8. AC 100 - 240VAC POWER SOCKET WITH INPUT POWER FUSE 9. RS-232 PORT 10. RS-

8 5. GENERAL OPERATION PRINCIPLE There are four operation methods for this unit: • Manual Operation • Presets • Timed Program • PC Interface

9 Program 1 to 9 is for nine sets of Presets of voltage and current. The program 0 is reserved for the 20 timed subprograms; each is capable of stori