BK Precision 9115-AT User Manual download pdf (Page 30)

5. To disable OVP at any time, just press twice. When it is disabled, the backlight

will disappear.

When OVP protection is tripped, the following screen will display:

To clear the trip status, press once.

Configure Maximum Power Limit

Follow the steps below to set the maximum power limit:

1. Press and then . The display will show P

max

on the bottom right. Use

the voltage or current adjust knob or the numeric keypad to enter the maximum power

output limit.

2. Press to save the change.

3. Use the voltage or current adjust knob or the numeric keypad to enter a value. This can

be from 1 ms – 600 ms.

4. Press to save the change. OVP is now configured. Notice the backlight

will turn on. This means OVP is enabled.

5. To disable OVP at any time, just press twice. When it is disabled, the backlight

will disappear.

When the output reaches the power maximum limit, the over power protection is tripped and

the following screen will display:

80.000VOVP

12.000A

0.0W

OFF Prot

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

No comments

BK Precision 9115-AT User Manual Page 30