BK Precision 9115-AT User Manual download pdf (Page 50)

Pressing the same number will change the “Y” back to the corresponding number. For

example, if you want to configure and store a sequence with steps 1, 4, 6, and 8, press 1,

4, 6, and 8 on the numeric keypad so that the following will display:

7. For this example, steps 1, 2, 3, 4, and 5 will be used, so use the numeric keypad and

press 1, 2, 3, 4, and 5 until it displays:

8. Once set, press . The display will change to the following:

9. This is prompting the user to enter the voltage setting for step 1. Use the voltage and

current adjust knob or the numeric keypad and enter 1.000. Then press .

10. The display will change to the following, prompting the user to enter the current setting

for step 1.

11. Similar to entering the voltage setting in the previous step, do the same to enter 1.000

as the current setting. Then press . Now, the following will display:

EDIT SEQ CURRENT

Seq Step 1 Current = 1.000A

EDIT SEQ VOLTAGE

Seq Step 1 Voltage = 1.000V

SEQ

Active Step: 09876YYYYY

SEQ

Active Step: 09Y7Y5Y32Y

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

No comments

BK Precision 9115-AT User Manual Page 50